Di-tert-butyl Polysulfide

2024-05-21T11:06:49+08:00

Di-tert-butyl Polysulfide is widely & mainly used as cracking furnace tube coking inhibitor & sulfiding hydrotreating and hydrocracking catalysts. To replace DMDS in refineries, equivalent to TBPS 454 & TPS 44. Also used as additive of industrial lubricants for automotive gear oils and greases.

2-Ethylhexanol

2024-04-26T11:58:55+08:00

2-Ethylhexanol is a clear, colorless to pale yellow oily liquid. It has a mild, oily, sweet, slightly floral odor reminiscent of rose and sweet, fatty-floral taste with a fruity note. Soluble in 720 times water, miscible in most organic solvents.

Edtrix 200SC

2024-04-26T13:30:26+08:00

Edtrix 200SC is a highly concentrated anionic surfactant. The heat stable product has excellent emulsifying and dispersing ability, which makes it a preferred emulsifier/dispersing agent in o/w systems and dispersant in various applications.

Emulsifier SP-1306F

2024-04-26T13:33:14+08:00

Emulsifier SP-1306F is an emulsifier for different applications. It is resistant to high level of electrolytes. It can be used standalone or in combination with other emulsifiers.

Tetraethyl Lead

2024-04-26T14:44:54+08:00

TEL (Tetraethyl lead) is added to gasoline as an additive to increase the octane number of the fuel to prevent knock in the engine, so that higher compression ratios can be used to improve the efficiency and power of engines. And extend the life of each part. It is now used in aviation gasoline to prevent knock.

Methylcyclopentadienyl Manganese Tricarbonyl

2024-04-26T14:46:54+08:00

Methylcyclopentadienyl Manganese Tricarbonyl, or MMT, is a metal-based fuel additive that is used to improve the performance of gasoline. It is a clear liquid that is added to gasoline in small amounts to increase the octane rating and provide antiknock properties.

Trideceth-6 Phosphate

2024-05-21T11:18:09+08:00

Trideceth-6 Phosphate are clear to pale yellow liquids used as surfactants and emulsifiers in personal care and industrial products. They lower surface tension and stabilize mixtures of oil and water. They are considered safe when used in accordance with guidelines.

Cyclohexylamine

2024-04-26T14:50:31+08:00

Cyclohexylamine is a cyclic amine with the chemical formula C6H13N. It is a clear, colorless liquid with a strong odor and is soluble in water and alcohol. It is commonly used as a building block in the manufacture of various chemicals, including pharmaceuticals, rubber additives, and pesticides.

Nickel(II) Oxide

2024-04-26T14:54:36+08:00

Nickel(II) oxide is a chemical compound with the formula NiO. It is a black, odorless, and insoluble solid that is composed of nickel cations and oxide anions.Nickel(II) oxide is a highly stable compound that is resistant to high temperatures and oxidation.

Basic Nickel(II) Carbonate

2024-04-26T14:58:28+08:00

Basic Nickel(II) Carbonate is an important chemical raw material, widely used in industrial catalysts, precision electroplating, printed circuit board electroplating, general alloy electroplating, nickel-nickel alloy electroforming, ceramic industry and other industries.

Cobalt(II) Acetate Tetrahydrate

2024-05-21T11:05:28+08:00

Cobalt(II) acetate tetrahydrate is a chemical compound with the formula Co(CH3COO)2·4H2O. It is a pinkish-red crystalline solid that is soluble in water and polar organic solvents. It is commonly used as a catalyst in organic synthesis reactions and as a precursor for the production of other cobalt compounds.

Nickel(II) sulfamate solution

2024-04-26T15:26:34+08:00

Nickel(II) sulfamate solution is an aqueous solution containing nickel ions and sulfamate ions. It is commonly used in electroplating applications to deposit a layer of nickel onto a metal surface. The solution is typically prepared by dissolving nickel sulfate and sulfamic acid in water. The resulting solution is stable and can be used at a range of temperatures and pH levels.

Nickel(II) Acetate

2024-04-26T15:26:53+08:00

Nickel(II) Acetate can exist in the form of anhydrate, dihydrate and tetrahydrate. under normal temperature and pressure, it is a green crystal or crystalline powder with a slight acetic acid smell, easily soluble in water and acetic acid, and loses crystal water at 90°C to become a yellow-green powder.

Sodium Di(isobutyl)dithiophosphinate

2024-05-09T14:02:24+08:00

Sodium Di(isobutyl)dithiophosphinate used as an effective collector for the flotation of copper or zinc sulfide ores and some precious metal ores, such as gold and silver, both with weak foaming; it's a weak collector for pyrite in alkaline loop.

Sodium Iso-butyl Xanthate

2024-05-09T14:25:48+08:00

Sodium iso-butyl xanthate is a powerful chemical reagents which used as collector for flotation treatment of sulphide multimetallic ores, specially used in natural circuit for chalcopyrite and copper pyrite ores.

Sodium Ethyl Xanthate

2024-05-09T14:28:57+08:00

Sodium ethyl xanthate is a low cost but a high selective collector of available xanthates.It is most useful in the flotation of sulphide ore and multi-metallic ore for maximum selectivity.

Sodium Butyl Xanthate

2024-05-09T14:30:04+08:00

Sodium butyl xanthate is a powerful chemical reagent which is used as collector for flotation treatment of sulphide multimetallic ores, specially used in natural circuit for chalcopyrite and copper pyrite ores.

Potassium Butyl Xanthate

2024-05-09T14:39:59+08:00

Potassium Butyl xanthate is a yellowish or pale grey powder or pellet with a pungent odour, soluble in water and alcohol, it can from insoluble compounds with various metallic ions.

Dimethyl Disulfide

2024-05-11T14:01:47+08:00

Dimethyl Disulfide used as solvent and pesticide intermediate, in the petroleum refining industry, widely used in naphtha, gasoline, kerosene, diesel and atmospheric pressure heavy oil hydrodesulfurization, hydrotreating and hydrocracking catalyst pre-vulcanization process activator.

Potassium Amyl Xanthate

2024-05-13T13:31:24+08:00

Potassium Amyl Xanthate used as the collector for the flotation of non-ferrous metal mineral which need strong collector but no selectivity,it is a good collector for the flotation of oxidized sulfide ore or copper oxide and zinc oxide (vulcanized by the sulfiding agent) as well as copper-nickel sulfide ores and gold bearing pyrite ores,and so on.

Sodium Iso-propyl Xanthate

2024-05-13T14:02:22+08:00

Sodium Iso-propyl Xanthate Cas No: 140-93-2 used as the flotation collector for non-ferrous metal sulphide ore, with medium flotation; also can be used as rubber sulfide accelerator and production of O-isopropyl-N-ethyl thionocarbamate. It has a wide range of uses in the flotation of metal sulphides,sulphidised ores.It may also be used as a vulcanisation accelerator for the rubber industry and a precipitant in the wetting metallurgical industry. ZXCHEM GROUP

Glutaraldehyde

2024-05-21T11:10:53+08:00

Glutaraldehyde CasNo.: 111-30-8 is a liquid chemical with many advantages like a disinfectant preservative and fixing agent. It is an efficient agent for a range of microorganisms including spores. Glutaraldehyde is a chemical that belongs to the dialdehyde group that has reached wide application as an advanced disinfection agent and sterilant chemical.

Go to Top